INERT SIEX-100

INERT SIEX 100 uses nitrogen for a clean, safe and 100% ecological extinguishment. This gas is widely used in a variety of extinguishing systems due to its excellent pressurization conditions.

 

In this case it complies with equal smothering efficiency by reducing the oxygen concentration to extinguish the fire, while leaving a percentage of oxygen suitable for occupied areas. Due to this feature, hazards can be protected where there is the possibility that people will be in the enclosure at the time of the fire, ensuring their safe evacuation both in terms of the level of oxygen in the room, and the absence of chemicals in the discharge. In addition, its physical and dispersion properties help maintain visibility during the evacuation.

It is highly recommended for class A, B and C hazards. The system operates by total flooding of the room, ensuring discharge in less than 1 minute with the safety conditions mentioned above. SIEX has two variants depending on the storage pressure: INERT SIEX-55 200 bar and INERT SIEX-55 300 bar; this makes it possible to adapt the quantity of extinguishing agent required, to the storage space available for the cylinders. The system is optimized for the worst case conditions, all components are certified to ensure the strictest performance. These are necessary for the storage, detection, release and discharge of the agent at the right moment.

Documentation

INERT SIEX 100 300BAR BROCHURE

INERT SIEX 100 200BAR BROCHURE

INERT SIEX 01 200BAR BROCHURE

Applications
  • Stations and airports
  • Telecommunication systems
  • Computer Rooms
  • Gas installations
  • Offshore platforms
  • Hospitals
  • Wind turbines
  • Petrochemical facilities
  • Laboratories
  • Electrical cabinets and substations
  • Archives and libraries
  • Educational institutions
  • Pharmaceutical Industry
  • Museums and art galleries
  • Offices
  • Residential buildings
  • Etc.
Product Data
  • Easy to obtain anywhere in the world.
  • Very low cost refills.
  • Allows for longer pipe runs.
  • Excellent post-discharge visibility.
  • Cost savings using selector valves.
  • Suitable for occupied areas.
  • Zero depletion of the ozone layer and no greenhouse effect.
  • VdS and UL certification.

About IG 100 extinguishing agent

Nitrogen gas is clean, generates no combustion products, is non-toxic, and does not cause irritation to the skin and eyes. It is harmless to people at design concentrations and is therefore ideal for extinguishing fires in occupied spaces. In addition, when discharge occurs, visibility is high, so that evacuation is not impaired.

Pure nitrogen is obtained by distillation of air, so it is a completely environmentally friendly gas with zero ozone depletion (ODP) and zero global warming potential (GWP). Since it is not a mixture of gases, it is easy to refill and can be acquired at any geographic location.

Nitrogen is non-corrosive and can be used at normal temperatures with materials typically used in industry and construction. It is electrically non-conductive and is therefore highly recommended for protecting electrical and electronic materials. Colorless, odorless, tasteless, electrically non-conductive and chemically neutral gas

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt